 Ceramic Disc Faucet
Model 1040 & 1040BNP
- 1/4 turn ceramic disc faucet for use with Rainfresh and other drinking water systems (except SST) - Chrome finish (1040) & brushed nickel (1040 BNP)
- Easily adapts to 1/4" OD or 3/8" OD tube - NSF/ANSI 53 component
|
 Mounting Bracket
Model BH010-6
- Mounting bracket for Rainfresh high flow housing models BH010 & BH020
- Made of Solid powder-costed heavy-duty metal
- 4 head screws included
|
 Head Seal
Model 518
- Head seal for Rainfresh FC series filter housings – FC000, FC100, FC005, FC050, FC150, FC200, FC250, FC300, FC355 & old drinking water systems DS2, DS3, CT500
- Silicone lube included |
 Head "O" Ring
Models 2502
- 2-pk Head seal for Rainfresh Drinking Water system models UCS2, UCS3, RO450, RO450M, UC000/1M
- Silicone lube included
|
|
 Solder-less Connector Kit
Model CK1
- Compression and threaded fitting kit to install Rainfresh whole-house standard filter (FC100, FC005) to 1/2" or 3/4" copper CPVC or PEX pipe
- Includes one 3/4" shut-off valve & thread sealant tape
Click Here for installation instructions
|
 Solder-less Connector Kit
Model CK2
- Compression and threaded fitting kit to install Rainfresh whole-house deluxe filter (FC150, FC050) to 1/2" or 3/4" copper, CPVC or PEX pipe
- Includes thread sealant tape
Click Here for installation instructions
|
|
 Solder-less Connector Kit
Model CK3
- Compression and threaded fitting kit to install Rainfresh undersink filter systems to 1/2" or 3/4" copper CPVC or PEX pipe
- Includes one 3/4" shut-off valve & thread sealant tape
Click Here for installation instructions
|
 Mounting Bracket
Model 1504P
- Mounting bracket for "FC" series whole-house filter housings and undersink / inline filter models FC200, FC250 & UC205
|
For use with Rainfresh UV Systems only
R519L/ R830L - UV lamp for R519/R830 UV systems
R1245L - UV lamp for use with R1245 UV system
RUV5L/ RUV8L/RUV12L : UV lamps for discontinued RUV5, RUV8 and RUV12 UV Systems. Instructions
|
 O-Rings for High Flow Filter Housings
Model BH010-3
- Upper and lower “O” rings set for high flow filter housing models BH010 & BH020
|
R519QD - Quartz dome for use with R519 UV system
R830QD - Quartz dome for use with R830 UV system
R1245QD - Quartz dome for use with R830 UV system
|
 Booster Pump for Reverse Osmosis System RO450
- 110V, quiet pump, boosts water pressure for RO systems (up to 80 psi). Includes transformer and pressure switch
- Pump works only when RO is making water. Shuts off when tank is full.
- Easy push-in fittings - no plumbing required. Installs in minutes
|
|
Solenoid for R830 & R1245 UV Systems
Model : R830S
 - Optional 12 V DC solenoid only for use with R830 or R1245 systems with solenoid output wire on ballast. - Shuts water off in case of lamp or power failure
- Includes manual bypass option
- 3/4" Female NPT connections
|
 RO Membrane
Model ROM50
- For use with Rainfresh RO450, RO450M and other competitive standard RO systems
- 50 GPD capacity. - 75GPD (ROM75) and 100 GPD (ROM100) also available.
|
 Flow Controls
Models : FR5K, FR8K & FR12K
- Easy solderless flow control kits to limit flow rates to 5, 8 or 12 GPM
- For optional use with Rainfresh or other UV systems |
 TDS Monitor for RO System
- Optional battery operated inline digital monitor gives you TDS of feed water and treated water from your RO system at the press of a button
- Attaches to any RO system |
